A Brief Introduction to Galvanized Steel Stripes
Finish: The surface of galvanized steel strips is free form scales, seams, Zinc flakes and other surface imperfection. The zinc coating shall be smooth and continuous.
Thickness: 0.15 mm to 2.00 mm
Width: 15 mm to 1250 mm
Tensile Strength: 28 to 50 kgf/mm2
Elongation: Minimum 10% on 254 mm gauge length.
Zinc Coating: Minimum 110 gm/sqm (total weight on all four sides). However, this can be designed to suit customer's requirements.
|Thickness (mm)||0.10 to 2.00||0.30 to 2.00||0.12 to 1.20||0.30 to 2.00|
|Width (mm)||Up to 1250||Up to 1250||660,762,800,900,1050||Upto 1250|
|Cut-To-Length (mm)||Up to 4500||Up to 4500||Up to 4100 (16")||Upto 4500|
|Surface Finish||Regular And minimum Spangles||Mate with Zero/minimum Spangles||Regular Spangles||Matte|
|Coating Mass (Gms/m2)||80 to 300||80 to 300||80 to 300||80 to 300|
|Grades||Soft/Lock Forming||EDD, DD & D ( SPCEN, SPCD, SPCC)||Roofing||EDD,DD&D|
Galvanized steel coils are wrapped in strong water proof sea-worthy packing and are in palletized loads.
Other types of packing can be done as required.
Normal Delivery Schedules
Delivery Form: Galvanized Steel Strips are supplied in continuous lengths in ribbon wound coils.
Coil Size: Inside Diameter- minimum 150 mm, Outside Diameter - Within 400-800.
Galvanized Steel Strips are manufactured according to customer's requirements and specifications.
Our products conform to the following standards
ASTM A90 BS 2989
ASTM A93 IS 3975